|
主要配置与性能
|
|
Main configuration and performance
|
多工位多工序复合高频加工中心
Multi-Station Multi-Process composite HF processing center
1.可满足轴类、平面不同加工特性高频热处理
2.智能化一键开机，电源参数可记录、存储、打印
3.机电一体化造型，构件防锈、防磁、防腐
4.感应器三维自动找正
5.冷却介质流量、压力自动控制
1. capable of HF heat treatment to such work pieces as gear and disc
2. The intelligent one-key start-up function used to record, store and print the power supply parameters
3. Mechatronics modeling with components proof against rust, magnet and corrosion
4. Inductor capable of three-dimensional auto alignment
5. Auto control of cooling medium flow and pressure
参数表示方法
Representation for parameters
GGQ100FH-L500×Φ60-L1000×W100
GGQ100表示固态电源IGBT100KW,功率大小根据负载的大小而决定。
FH表示复合
L500×Φ60表示轴类工件直径为60mm，长度500mm。
L1000×W100表示平面工件长度为1000mm,宽100mm。
GGQ100FH-L500×Φ60-L1000×W100
GGQ100 indicates solid power supply IGBT100KW while the power level depends on the load.
FH indicates composite type
L500×Φ60 indicates 60mm diameter and 500mm length for shaft piece.
L1000×W100 indicates 1,000mm long and 100mm wide for plane piece.
